Epoxy troubleshooting guides
What went wrong, why, and how to fix it. Product numbers come from the makers' data sheets and product pages.
Fix a problem
- Why is my epoxy still sticky? Wrong ratio, poor mixing, a cold shop or amine blush, and how to tell which.
- Cloudy, milky or yellow epoxy Moisture, cold resin, micro-bubbles, overheated deep pours and UV.
- Bubbles in epoxy Mixing, cold, coat thickness and air from unsealed wood; removing bubbles wet or sanding them out.
- Fisheyes and pulling away from the edge Contamination, thin coats and surface prep.
- Epoxy layers not bonding Recoat windows, sanding and layer lines.
Plan and pour
- How to flood coat a table Seal coat, maximum thickness, coverage, bubbles and recoat timing.
- Epoxy cure time and temperature Published cure times and what changes them.
- First pour checklist A printable list to go through before a river table or casting.
- Epoxy product comparison Max pour depth, mix ratio, working and cure times from the makers' data.
Calculators
- River table epoxy calculator Volume from river widths, with waste and a pour-depth check.
- Flood coat calculator Epoxy for a seal coat, flood coats and edges.
- Mold and casting calculator Volume of rectangular, round or custom molds.
- Mix ratio calculator Part A and Part B by volume or weight.
- Deep pour planner Split a thick pour into layers within the product's limits.